390 Ethernet Configuration Commands
show statistics
Use the show statistics command in Privileged EXEC mode to display
detailed statistics for a specific port or for the entire switch.
Syntax
show statistics {gigabitethernet
unit/slot/port
|switchport |
port-channel
port-channel-number
| tengigabitethernet
unit/slot/port
}
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Examples
The following example shows statistics for port 1/0/1.
console#show statistics gigabitethernet 1/0/1
Total Packets Received (Octets)............... 779533115
Packets Received 64 Octets..................... 48950
Packets Received 65-127 Octets................. 482426
Packets Received 128-255 Octets................ 101084
Packets Received 256-511 Octets................ 163671
Parameter Description
unit/slot/port
A valid interface. See Interface Naming Conventions for
interface representation.
switchport Displays statistics for the entire switch.
2CSPC4.XModular-SWUM200.book Page 390 Thursday, March 10, 2011 11:18 AM
