QoS Commands 609
Syntax
cos-queue {random-detect
queue-id1
[
queue-id2
..
queue-idn
]}
no cos-queue {random-detect
queue-id1
[
queue-id2
..
queue-idn
]}
Parameter Description
Default Configuration
WRED queue management policy is disabled by default. Tail-drop queue
management policy is enabled by default.
Command Mode
Interface Configuration (physical or port-channel)
User Guidelines
When used on a port-channel, this command will override the settings on the
individual interfaces that are part of the port channel.
This command can be used in Interface Range mode.
Use the cos-queue min-bandwidth command to configure the minimum
bandwidth percentage for the CoS queues.
Use the show interfaces random-detect command to display the WRED
configuration.
Example
console(config)# cos-queue min-bandwidth 5 5 10 5 5 5 5
console(config)# cos-queue random-detect 2 6
Parameter Description
queue-id An integer indicating the queue-id which is to be enabled for
WRED. Range 0-6. Up to 7 queues may be simultaneously
specified.
2CSPC4.XModular-SWUM200.book Page 609 Thursday, March 10, 2011 11:18 AM
