Command Groups 141
Captive Portal
boot host retrycount Set the number of attempts to download a
configuration.
GC
show auto-copy-sw Displays Stack Firmware Synchronization
configuration status.
PE
show boot Displays the current status of the Auto Config
process.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
Command Description Mode
a
authentication timeout Configures the authentication timeout. CP
captive-portal Enables the captive portal configuration mode. GC
enable Globally enables captive portal. CPI
http port Configures an additional HTTP port for captive
portal to monitor.
CP
https port Configures an additional HTTPS port for
captive portal to monitor.
CP
show captive-portal Displays the status of captive portal. PE
show captive-portal status Reports the status of all captive portal instances
in the system.
PE
block Blocks all traffic for a captive portal
configuration.
CPI
configuration Enables the captive portal instance mode. CP
enable Enables a captive portal configuration. CPI
group Configures the group number for a captive
portal configuration.
CPI
interface Associates an interface with a captive portal
configuration.
CPI
locale Associates an interface with a captive portal
configuration.
CPI
Command Description Mode
a
2CSPC4.XModular-SWUM200.book Page 141 Thursday, March 10, 2011 11:18 AM
