404 Ethernet Configuration Commands
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example assigns the name "protected" to group 1.
console(config-if-1/0/1)#switchport protected 1 name
protected
show switchport protected
Use the show switchport protected command in Privileged EXEC mode to
display the status of all the interfaces, including protected and unprotected
interfaces.
Syntax
show switchport protected
groupid
•
groupid
— Identifies which group the port is to be protected in.
(Range: 0–2)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example identifies test as the protected group.
console#show switchport protected 0
2CSPC4.XModular-SWUM200.book Page 404 Thursday, March 10, 2011 11:18 AM
