304 Data Center Bridging Commands
Example #2
console#clear priority-flow-control statistics port-
channel 1
Example #3
console#clear priority-flow-control statistics
datacenter-bridging
Use the datacenter-bridging command for an ethernet or port-channel
interface in order to enter the DataCenterBridging mode. Priority-Flow-
Control is configurable from within the DataCenterBridging mode.
Syntax
datacenter-bridging
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet, Port-channel) mode
User Guidelines
This command has no user guidelines.
Example
console#config
console(config)#interface range ethernet all
console(config-if)#datacenter-bridging
console(config-if-dcb)#priority-flow-control mode on
console(config-if-dcb)#priority-flow-control priority
1 no-drop
2CSPC4.XModular-SWUM200.book Page 304 Thursday, March 10, 2011 11:18 AM
