1038 Multicast Commands
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays the multicast configuration settings such as
flags, timer settings, incoming and outgoing interfaces.
console#show ip mcast mroute group 224.5.5.5 summary
console#show ip mcast mroute group 224.5.5.5 detail
show ip mcast mroute source
Use the show ip mcast mroute source command in Privileged EXEC mode to
display the multicast configuration settings such as flags, timer settings,
incoming and outgoing interfaces, RPF neighboring routers, and expiration
times of all the entries in the multicast mroute table containing the
sourceipaddr
or
sourceipaddr
|
groupipaddr
pair value(s).
Syntax
show ip mcast mroute source
sourceipaddr
{summary |
groupipaddr
}
•
sourceipaddr
— IP address of source.
•
groupipaddr
— IP address of multicast group.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
2CSPC4.XModular-SWUM200.book Page 1038 Thursday, March 10, 2011 11:18 AM
