A SERVICE OF

logo

Open as PDF
next previous
User Interface Commands 1611
Command Mode
All command modes. In User EXEC mode, this command behaves identically
with the quit command.
User Guidelines
There are no user guidelines for this command.
Example
The following example changes the configuration mode from Interface
Configuration mode to User EXEC mode to the login prompt.
console(config-if-Gi1/0/1)# exit
console(config)# exit
console#exit
console>exit
User:
mode simple
NOTE: The PCM8024-k switch defaults from the factory in Simple Mode of operation.
Use the mode simple command to select the Simple Mode as the start up
mode. To select Normal Mode as the operational mode, use the no form of
this command.
Syntax
mode simple
no mode simple
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
2CSPC4.XModular-SWUM200.book Page 1611 Thursday, March 10, 2011 11:18 AM