Filter
Top Products
105
Voice Mode
OSC Out (Oscillator Out)
Set the Wave or Normal Voice output settings for each
Drum Key.
■ Level
Set the output level for each Wave or Normal Voice.
This can be used to adjust the output of each Drum
Key.
❏ Settings: 0 ~ 127
■ InsEF (Insertion Effect)
Select the Insertion Effect to which the output of
each Drum Key will be sent. If Thru is selected, the
Insertion Effects are bypassed.
❏ Settings: thru, ins1 (Insertion Effect 1), ins2 (Insertion
Effect 2)
■ RevSend (Reverb Send)
Set the Send level of the Drum Key signal sent from
Insertion Effect 1/2 (or the bypassed signal) to the
Reverb effect.
❏ Settings: 0 ~ 127
This setting plus the Reverb Send level set in the QED
Level screen (Page 81) are the final Reverb Send level
settings.
Details about the Effects are given on Page 65.
■ ChoSend (Chorus Send)
Set the Send level of the Drum Key signal sent from
Insertion Effect 1/2 (or the bypassed signal) to the
Chorus effect.
❏ Settings: 0 ~ 127
This setting plus the Chorus Send level set in the QED
Level screen (Page 81) are the final Chorus Send level
settings.
For a Drum Key with the Insertion Effect set to other
than Thru, the Chorus Send level will be determined by
the QED Level screen.
Details about the Effects are given on Page 65.
OSC Pan (Oscillator Pan)
Assign Pan settings for each Drum Key in the Drum
Voice. Different Pan types are available.
The Pan, Alter (Alternate) and Random settings will be
ignored if you set the Output to “ind1” to “ind6.”
OSCíPan) Pan Alter Random Output
Key=C 3 C L63 63 L&R
OSCíOut) Level InsEF RevSend ChoSend
Key=C 3 127 thru 64 127
■ Pan
Set the Pan position for each sound in a Drum Voice
(Drum Kit). This will also be used as the basic Pan
position for the Alternate and Random settings.
❏ Settings: L63 (Left) ~ C (Center) ~ R63 (Right)
■ Alter (Alternate)
Set the amount by which the sound is panned
alternately left and right for each note you press.
The Pan setting is used as the basic Pan position.
❏ Settings: L64 (Left) ~ 0 (Center) ~ R63 (Right)
This parameter is only available if the Type parameter
in the OSC Wave screen is set to “wave.” If set to “vce”
(Normal Voice), this parameter is unavailable.
■ Random
Set the amount by which the sound is panned
randomly left and right for each note you press. The
Pan setting is used as the basic Pan position.
❏ Settings: 0 ~ 127
This parameter is only available if the Type parameter
in the OSC Wave screen is set to “wave.”
■ Output
Assign each Drum Key to an output.
❏ Settings: L&R (OUTPUT L & R), ind1&2 (INDIVIDUAL
OUTPUT 1 & 2), ind1 (INDIVIDUAL OUTPUT
1), ind2, ind3, ind4, ind5, ind6
Settings “ind3” to “ind6” are for future expansion
purposes and are currently not available.
For example, if you choose “ind1&2,” the left channel
will be output through INDIVIDUAL OUTPUT1 and
the right channel will be output through INDIVIDUAL
OUTPUT2.
OSC Other (Oscillator Other)
You can set parameters which govern the sound of each
Drum Key making up the Drum Voice.
■ Assign
Set Key Assign to “single” to prevent the doubled
playback of the same received notes. Select “multi”
to consecutively assign each instance of the same
received note to a separate channel.
❏ Settings: single, multi
When the Alternate Group (AltGrp) parameter is set to
other than “off,” you cannot set this parameter (shown
as “----”).
OSCíOther) Assign RcvNtOff AltGrp
Key=C 3 single on off