Filter
Top Products
5-10 Advanced functions
JJM 18 05 16/00 Last amend: November 1999 – NAS
Home position functions
1. Store
The screen shows the list of items that
can be stored as a home position. Select
the item required.
Enter the details of the home position
required, see
Destination entry
, section
4.
After entry, the screen shows the map
location of the home position and ‘Press
ENTER to store in memory’. The map can
be scrolled to adjust the location if
required. When Enter is pressed the
screen briefly shows ‘Point stored’.
Note: If a home position has
previously been stored, it must be
deleted before entering a new one.
2. Display
The map showing the current home
position is displayed. Press F1 (Dest.) to
set a route to the home position. The
screen shows ‘Destination confirmed’
and the route is calculated, see
Route
calculation
on page 6-1.
Adjust/store position –
The current
home position (or a new position by
scrolling the map) can be entered as a
memory point or way point. Press the
function button required, the screen
briefly shows ‘Point Stored’.
3. Edit
The screen shows the map location of
the home position and ‘Press ENTER to
adjust position’. Scroll the map as
required and press Enter. When Enter is
pressed, the screen briefly shows ‘Point
adjusted’. The Home Position menu is
displayed again.
JOL.680U
JOL.243
JOL.244