Filter
Top Products
5-8 Advanced functions
JJM 18 05 16/00 Last amend: November 1999 – NAS
Avoid area functions
1. Store
The screen shows the list of items that
can be stored as avoid areas. Select the
item required.
Enter the details of the point required as
the centre of the area to be avoided, see
Destination entry
, section 4.
Area adjustment
– After entry, the
screen shows the map location of the
centre of the area. Use the function
buttons, F1 (Enlarge) and F2 (Reduce), to
select the area required, which is shown
within a rectangle on the screen. The
screen shows ‘Press ENTER to store in
memory’. When Enter is pressed the
screen briefly shows ‘Area stored’. If
under guidance, the route is
recalculated.
Note: An avoid area must include at
least one road junction.
2. Display
The screen shows the list of currently
stored areas. Select an area and press
F1 (Info.) or Enter:
F1 (Info.)
– The details of the selected
area are displayed. Press F1 (Map) or
Enter, see below.
Enter
– The screen shows the map
location of the selected area.
JOL.679U
JOL.240