Filter
Top Products
Advanced functions 5-5
JJM 18 05 16/00 Last amend: November 1999 – NAS
Way point functions
1. Store
The screen shows the list of items that
can be stored as way points. Select the
item required.
Enter the details of the point required,
see
Destination entry
, section 4.
After entry, the screen shows the map
location of the selected point and ‘Press
ENTER to store in memory’. The map can
be scrolled to adjust the location if
required. When Enter is pressed the
screen briefly shows ‘Point stored’. If
under guidance, the route is
recalculated.
2. Display
The screen shows the list of currently
stored way points. Select a point and
press F1 (Info.) or Enter:
F1 (Info.) –
The details of the selected
point are displayed. Press F1 (Map) or
Enter, see
Enter
below.
Enter –
The map showing the location of
the selected point is displayed.
Adjust/store point –
The map location
of the point can be entered as a
destination or memory point. If the map
is scrolled it can also be entered as a new
way point. Press the function button
required, the screen briefly shows ‘Point
Stored’.
Note: If the point is selected as a way
point while under guidance, the
route will be recalculated.
JOL.678U
JOL.237