Filter
Top Products
2-2 Quick reference
JJM 18 05 16/00 Last amend: November 1999 – NAS
Route setting example
This is a simple example showing how to use the basic features of the system to set a route. It describes each screen in turn and
explains how to use the controls. For information relating to the other features of the system, see the relevant section in the
handbook.
Note: Before using the system, check that the correct map CD is loaded, see Loading the map CD on page 1-5.
1. Initialisation
If the Jaguar screen is displayed, press
F1 (Nav.). The Road Safety Caution
screen is displayed.
2. Road safety caution
The screen shows safety information
which should be followed when using
the navigation system. see
Safety
information
on page 1-2.
Press F1 (Agree) to confirm. The screen
shows the map display.
Note: If required, press function
button F2 to change the language,
see Set up menu on page 3-6.
3. Map display
The initial map screen showing the
current vehicle position is displayed.
Press F1 (Menu) to display the Main
menu.
JOL.306
JOL.297
JOL.307