Filter
Top Products
69
Main Menu
• Insert Waypoint— inserts a new waypoint before the highlighted waypoint in the route.
To insert a point into the route or add a point to the end:
1. From the ‘Route’ tab, use the ARROW KEYPAD to highlight the the desired route and press ENTER.
2. On the Route Review page, use the ARROW KEYPAD to highlight the waypoint which will imme-
diately follow the new waypoint you wish to insert and press MENU. (To add a point to the end,
highlight the blank fi eld at the bottom of the list.)
3. Select ‘Insert Waypoint’ and press ENTER.
4. In Aviation Mode, a pop-up window appears, allowing you to select the desired waypoint. Enter the
identifi er, facility name or city for the desired waypoint using the steps described on page 65.
5. In Land or Water modes, the Find Menu appears. Highlight the desired waypoint category and press
ENTER. Follow the additional prompts to select the desired waypoint. (For more help on using the
Find Menu, see page 54.)
• Remove Waypoint— removes the highlight waypoint from the route. The deleted waypoint will
remain in memory, just not as part of the selected route.
• Invert— reverses the order of the waypoints in the selected route, as described on page 67.
• Select Approach— replaces the fi nal destination airport in the selected route with the sequence
of waypoints for a selected approach. To use this option, keep in mind that the airport must have
a published approach (GPS, RNAV, VOR, NDB, localizer or ILS) and only the fi nal course segment
(usually from fi nal approach fi x to missed approach point) of the published approach is available in
the GPSMAP 196.
To select and navigate an approach for the destination airport:
1. From the ‘Route’ tab, use the ARROW KEYPAD to highlight the the desired route and press ENTER.
2. Press MENU and highlight ‘Select Approach’.
3. Press ENTER to display a list of available approaches for the destination airport.
4. Use the ARROW KEYPAD to select the desired approach and press ENTER.
5. A ‘Vectors?’ pop-up window appears. (See page 45 for more information on vectors-to-fi nal.) Use
the ARROW KEYPAD to select ‘Yes’ or ‘No’ and press ENTER. The GPSMAP 196 will remove the
destination airport from the route and replace it with the approach waypoints.
Select ‘Invert’ to reverse the sequence of the route. This is an easy
way to re-use the route for the return trip home.
‘Select Approach’ displays a list of published approaches for
the destination airport and will add the approach waypoints
to your route.
Route Tab
190-00283-00Backup.indd 69 12/8/2002, 8:09:29 PM