Filter
Top Products
36
• Change Data Fields— allows you to choose the data types displayed on the two columns in the
middle of the Active Route Page. (Recall that the data type for the column along the right hand side
of the screen is changed using the ARROW KEYPAD.) There are ten different data options including:
altitude, bearing, course, distance, ETA, ETE, speed, track and a pointer. You can review the complete
list on the GPSMAP 196, and refer to Appendix D for defi nitions of each data fi eld term.
To change a data fi eld
1. Use the ARROW KEYPAD to highlight the ‘Change Data Fields’ option and press ENTER.
2. Move the fi eld highlight to the data fi eld you want to change and press ENTER.
3. Move up or down on the list using the ARROW KEYPAD to highlight the data you want to display,
and press ENTER to select. To exit, press QUIT.
• Restore Default— resets the two data columns in the middle of the Active Route Page to the original
factory settings.
Main Pages
Active Route Page Options
Select ‘Change Data Fields’, highlight the fi eld you wish to change
and press ENTER to display a list of available data types.
190-00283-00Backup.indd 36 12/8/2002, 8:09:08 PM