Filter
Top Products
59
Stopwatch
This feature allows you to use the unit as a stopwatch,
including a lap timer. You may also have the unit record
the lap time based on distance. For example, if you set the
lap distance to one mile, the unit will record the time it
takes you to travel one mile.
To start the stopwatch:
1. Use the CLICK STICK to highlight the ‘Start’
field and then press IN. You may also press the V
(Volume) key to Start the stopwatch.
To stop the stopwatch:
1. Use the CLICK STICK to highlight the ‘Stop’
field and then press IN. You may also press the V
(Volume) key to Stop the stopwatch.
To use the lap feature:
1. With the stopwatch running, use the CLICK STICK
to highlight the ‘Lap’ field and then press IN. You
may also press the Z (Zoom) key to capture the lap
time.
To reset the stopwatch:
1. With the stopwatch stopped, use the CLICK STICK
to highlight the ‘Reset’ field and then press IN. You
may also press the Z (Zoom) key to reset the times.
To time lap by distance:
1. Use the CLICK STICK to highlight the Options
Menu and then press IN. Choose ‘Lap by Distance’
and press IN. To return to ‘Lap by Button Press’,
repeat these same steps.
To set a lap distance value:
1. Use the CLICK STICK to highlight the Options
Menu and then press IN. Choose ‘Set Lap Distance’
and press IN. To return to ‘Lap by Button Press’,
repeat these same steps.
2. Use the CLICK STICK to highlight the field you
wish to change and then press IN. Enter the new
value and press IN. When done, highlight ‘OK’ and
press IN on the CLICK STICK.
Setting Lap By Distance
Main Menu Page
Stopwatch
Stopwatch Page
rino120_10.indd 59 9/13/2002, 3:28:15 PM