Filter
Top Products
Navigation Page with
Bearing Pointer
waypoint. A waypoint information page displays.
Press the on-screen ‘OK’ button to save the new
waypoint, then press it again after returning to the
Route Map.
To review or remove a route point:
1. Select the Route from the Routes List and press the
CLICK STICK IN to display the Route Page.
2. Use the CLICK STICK to highlight the desired route
and press IN to display the Route Page for that
route.
3. Use the CLICK STICK to move the map panning
arrow to the point you want to review and press
IN to pop-up the Options Menu. Select ‘Review’ or
‘Remove’ and press IN again to either display the
Information Page or remove it from the route.
To view the next point in the route:
1. Follow Steps 1 and 2 above.
2. Place the map panning arrow on the point you
are currently viewing and press IN to display the
Options Menu. Select ‘Next’ and press IN again to
view the next waypoint.
Navigating a Route
A Route can be navigated using the Map Page or the
Navigation Page. The Map Page displays your movement,
the route line, and waypoints on the route. The Naviga-
tion Page shows compass direction and a bearing pointer.
To navigate a route:
1. Select a route from the Routes List and then press
IN on the CLICK STICK to display the Route Page.
2. Highlight the on-screen ‘Navigate’ button at the
bottom of the page and then press IN on the
CLICK STICK to begin navigating the route.
The screen changes to the Navigation Page.
3. Move to the Map Page to view the route and the
position icon indicating your current location.
4. Begin moving, watching directional information on
the Navigation Page or progress on the Map Page.
Adding a new waypoint
within a Route
Main Menu Page
Routes
43
rino120_10.indd 43 9/13/2002, 3:28:04 PM