Filter
Top Products
54
Main Menu Page
Display Page
You can adjust the amount of time that the backlight-
ing feature stays on and adjust the screen contrast.
Backlighting Timeout - Choose from Stays On, to
delays of 15 seconds, 30 seconds, one, or two minutes
before timing out.
Contrast Adjustment - Can be adjusted from light
to dark using the slider adjacent to the contrast bar.
To set the backlighting timeout:
1. Highlight the Backlight Timeout field and then press
IN on the CLICK STICK to display options.
2. Highlight the desired option and then press IN on
the CLICK STICK to activate it.
To adjust the contrast:
1. Highlight the contrast slider and then press IN on
the CLICK STICK to activate.
2. Move the CLICK STICK up or down to move the
slider until the desired contrast has been set.
Heading Page
You can select the type of heading displays, the types
of North References, or enter the magnetic variation.
Display - Allows you to choose from Cardinal Let-
ters, Degrees or Mils.
North Reference - You can choose from True,
Magnetic, Grid or User options. If ‘User’ is chosen, you
must correct for the Magnetic Variation. The Electronic or
GPS compass uses the North Reference setting to create a
bearing.
To select either option:
1. Highlight the field and then press IN on the
CLICK STICK to display the options.
2. Highlight the option and press IN on the
CLICK STICK to activate.
Display Page
Heading Page
Setup Page
rino120_10.indd 54 9/13/2002, 3:28:13 PM