Filter
Top Products
Copernicus GPS Receiver 49
INTERFACE CHARACTERISTICS 3
Acquiring the Correct Time
To acquire the correct time:
1. Confirm that the almanac is complete and the receiver is generating 3D fixes.
This will eliminate the UTC offset jump.
2. Confirm that the receiver is configured for the late PPS option (i.e., it is only
outputting a PPS on a 3D fix).
3. Capture the time from TSIP packet 0x41 or TSIP packet 0x8F-20 (if using
TSIP).
4. Once time is acquired, on the next PPS add 1 to the whole second to read the
correct time.
Note – The minimum time resolution is 1 second.