Filter
Top Products
B TRIMBLE ASCII INTERFACE PROTOCOL (TAIP)
204 Copernicus GPS Receiver
Note – After the status is detected, this bit remains set until the receiver is reset.
Value C Meaning
0 No problems reported
1 Battery-back-up failed; RAM not available at
power-up (see Note below).
Value DD Meaning
DD Displays the machine ID
Value E Meaning
Not used Not used
Value F Meaning
0 No problems reported
2 RTC not available at power-up (see Note
below)
8 Stored almanac not complete and current
A RTC not available; stored almanac not
complete and current
Value GG Meaning
Not used Reserved