Filter
Top Products
A TRIMBLE STANDARD INTERFACE PROTOCOL (TSIP)
132 Copernicus GPS Receiver
Command Packet 0x1C: 03 - Hardware Component Version Information
• The command packet 0x1C: 03 may be issued to obtain the hardware
component version information.
• The report packet is of variable length, depending on the length of the
hardware ID.
• The serial number, build date fields, and the hardware ID are programmed into
the Copernicus GPS at production.
• The hardware code for Copernicus GPS Receiver is 1002.
• ID for Copernicus GPS Receiver is COPERNICUS GPS RECEIVER.
The packet format is defined below.
Table A.13 Command Packet 0x1C:03
Report Packet 0x1C: 83 - Hardware Component Version Information
Table A.14 Report Packet 0x1C:83
Byte Item Type Value Definition
0 Packet ID U8 0x1C Packet ID 0x1C
1 Sub-code U8 0x03 Sub-code 0x03 for hardware
component version information
request
Byte Item Type Value Definition
0 Packet ID U8 0x1C Packet ID 0x1C
1 Sub-code U8 0x83 Sub-code 0x83 for hardware
component version information
report
2…5 Serial
number
U32 Any Board serial number
6 Build day U8 1-31 Day of the board's build date
7 Build
month
U8 1-12 Month of the board's build date
8…9 Build year U16 Any Year of the board's build date
10 Build hour U8 0-23 Hour of the board's build date
11…12 Hardware
Code
U16 Any Hardware Code associated with
Hardware ID
13 Length of
Hardware
ID
U8 Any The length of the Hardware ID (L)
14... (13+L) Hardware
ID
U8 String Hardware ID string in ASCII