Filter
Top Products
Chapter 4 Command Quick Reference
Serial Interface Communication
Operating and Programming Guide 4-13
Serial Interface Communication
The following commands are provided to allow you to configure the serial
interface port(s) for instrument communications.
Configuring I/O Port 1
R
:SYSTem:COMMunicate?
R
:SYSTem:COMMunicate:SERial1:BAUD 1200 or 2400 or 9600 or 19200
R,F
:SYSTem:COMMunicate:SERial1:BAUD?
R
:SYSTem:COMMunicate:SERial1:BITS 7 or 8 (59551A)
R,F
:SYSTem:COMMunicate:SERial1:BITS?
R
:SYSTem:COMMunicate:SERial1:FDUPlex ON or OFF
R,F
:SYSTem:COMMunicate:SERial1:FDUPlex?
R
:SYSTem:COMMunicate:SERial1:PACE XON or NONE
R,F
:SYSTem:COMMunicate:SERial1:PACE?
R
:SYSTem:COMMunicate:SERial1:PARity EVEN or ODD or NONE
R,F
:SYSTem:COMMunicate:SERial1:PARity?
R
:SYSTem:COMMunicate:SERial1:SBITs 1 or 2 (59551A)
R,F
:SYSTem:COMMunicate:SERial1:SBITs?
Configuring I/O Port 2 (59551A Only)
F
:SYSTem:COMMunicate?
F
:SYSTem:COMMunicate:SERial2:BAUD 1200 or 2400 or 9600 or 19200
R,F
:SYSTem:COMMunicate:SERial2:BAUD?
R,F
:SYSTem:COMMunicate:SERial2:BITS?
F
:SYSTem:COMMunicate:SERial2:FDUPlex ON or OFF
R,F
:SYSTem:COMMunicate:SERial2:FDUPlex?
F
:SYSTem:COMMunicate:SERial2:PACE XON or NONE
R,F
:SYSTem:COMMunicate:SERial2:PACE?
F
:SYSTem:COMMunicate:SERial2:PARity EVEN or ODD or NONE or ONE
R,F
:SYSTem:COMMunicate:SERial2:PARity?
R,F
:SYSTem:COMMunicate:SERial2:SBITs?
Recovering the Last Query Response
:DIAGnostic:QUERy:RESPonse?
R: Accessible via rear-panel PORT 1.
F: Accessible via Front-panel PORT 2 of the 59551A
Basic command