Filter
Top Products
Chapter 5 Command Reference
Receiver Identification/Upgrade
Operating and Programming Guide 5-115
Installing Firmware via I/O PORT 1 ______________________
The commands in this section represent the command set of the “INSTALL”
language. The “INSTALL” language is part of a highly-specialized set of
features used to erase the Receiver’s firmware, and to install a new firmware
revision. It should be selected only when firmware installation is required.
The “INSTALL” language offers the limited number of commands and queries
which are documented in this section. This set is designed to provide the
Receiver status and control capability required during firmware upgrade.
NOTE The SatStat program provides a Service menu which automates firmware
installation.
This command clears errors.
This command sends down a Motorola S-record.
Expanded Syntax
:DIAGnostic:DOWNload <Motorola S-record>
This command erases the flash EEPROM. It should ONLY be sent to the
Receiver as a preparatory step during firmware upgrade. Erasing flash
EEPROM will disable the instrument until flash EEPROM is reloaded with
factory-supplied instrument firmware.
*CLS
R
Clears errors.
EVENT
:DIAGnostic:DOWNload . . .
R
Sends down a Motorola
S-record.
EVENT
:DIAGnostic:ERASe
R
Erases the flash EEPROM.
EVENT
!