Filter
Top Products
Chapter 5 Command Reference
Operating Status
Operating and Programming Guide 5-45
Reading the Diagnostic Log _____________________
(continued)
This command is an event that removes all previous diagnostic log entries, and
effectively sets the number of diagnostic log entries to one.
This query returns all of the most recent diagnostic log entries.
This command clears the diagnostic log. The optional log count parameter is
provided to ensure that no log entries are unread at the time of the clear.
Expanded Syntax
:DIAGnostic:LOG:CLEar <current log size>
Parameter
If the value sent for the optional log parameter does not match the current log
entry count (use :DIAG:LOG:COUN? to obtain this number), the clear will not
take place.
Context Dependencies
This command is always valid. If the optional log count parameter is sent, and
the current and actual log count does not match log count value, the clear will
not be performed and
error -222
will be generated.
:DIAGnostic:LOG:CLEar
:SYSTem:PRESet
Clears the diagnostic log.
Log is cleared
NON-VOLATILE
:DIAGnostic:LOG:READ:ALL?
RESPONSE FORMAT
Returns all of the most recent diagnostic log entries.
“XYZ”, ...
:DIAGnostic:LOG:CLEar . . .
:SYSTem:PRESet
Clears only the current diagnostic log.
Log is cleared
NON-VOLATILE