Filter
Top Products
Chapter 5 Command Reference
Receiver Initialization
5-112 Operating and Programming Guide
:STATus:OPERation:ENABle ... 36 (NV)
:STATus:OPERation:HARDware:ENABle ... 8191 (NV)
:STATus:OPERation:HARDware:NTRansition ... 0 (NV)
:STATus:OPERation:HARDware:PTRansition ... 5119 (NV)
:STATus:OPERation:HOLDover:ENABle ... 8 (NV)
:STATus:OPERation:HOLDover:NTRansition ... 0 (NV)
:STATus:OPERation:HOLDover:PTRansition ... 15 (NV)
:STATus:OPERation:NTRansition ... 0 (NV)
:STATus:OPERation:POWerup:ENABle ... 7 (NV)
:STATus:OPERation:POWerup:NTRansition ... 0 (NV)
:STATus:OPERation:POWerup:PTRansition ... 7 (NV)
:STATus:OPERation:PTRansition ... 127 (NV)
:STATus:QUEStionable:CONDition:USER ... Cleared (NV)
:STATus:QUEStionable:ENABle ... 3 (NV)
:STATus:QUEStionable:NTRansition ... 0 (NV)
:STATus:QUEStionable:PTRansition ... 2 (NV)
:SYNChronization:HOLDover:DURation? 0,0 (Even if there was a prior
holdover, its duration will be lost.)
:SYNChronization:HOLDover:DURation:THReshold ... 86400 (that is, 1 day), (NV)
:SYNChronization:STATe? POWerup
:SYSTem:ERRor? Error queue is cleared.
:SYSTem:LANGuage ... "PRIMARY"
* NV stands for non-volatile memory.
** V stands for volatile memory.
Table 5-2. System Preset (Factory Default) Parameter Settings
Summary (Continued)
Commands :SYSTem:PRESet