Filter
Top Products
Chapter 4 Command Quick Reference
Chapter Contents
4-2 Operating and Programming Guide
Chapter Contents
This chapter is a quick reference that summarizes the GPS Receiver
commands which allow you to operate and program the Receiver.
This chapter is organized as follows:
• An Introduction to GPS Receiver Commands page 4-4
– SCPI Conformance Information page 4-4
– Command Syntax Conventions page 4-4
– Command Presentation page 4-4
• GPS Satellite Acquisition page 4-5
– Facilitating Initial Tracking page 4-5
– Establishing Position page 4-5
– Selecting Satellites page 4-6
– Compensating for Antenna Delay page 4-6
– Monitoring Acquisition page 4-6
• 1 PPS Reference Synchronization page 4-7
– Monitoring 1 PPS Synchronization page 4-7
– Assessing 1 PPS Quality page 4-7
– Operating in Holdover page 4-7
• Operating Status page 4-8
– Receiver Operation at a Glance page 4-8
– Reading the Error Queue page 4-8
– Reading the Diagnostic Log page 4-8
– Monitoring Status/Alarm Conditions page 4-8
– Assessing Receiver Health page 4-9