Filter
Top Products
Chapter 5 Command Reference
Serial Interface Communication
5-102 Operating and Programming Guide
Configuring I/O Ports ___________________________
(continued)
This query returns the baud rate of specified port.
Expanded Syntax
:SYSTem:COMMunicate:SERial1:BAUD?
:SYSTem:COMMunicate:SERial2:BAUD?
59551A
This command sets the data bits of PORT 1.
Expanded Syntax
:SYSTem:COMMunicate:SERial1:BITS 7 or 8
Parameter
The possible data bits values that can be entered are 7 or 8.
Context Dependencies
The data bits value is stored in non-volatile memory. It is unaffected by
powerup and :SYSTem:PRESet.
:SYSTem:COMMunicate:SERial1:PRESet sets the data bits to 8, which is the
factory-default value.
:SYSTem:COMMunicate:<port>:BAUD?
RESPONSE FORMAT
R, F
Returns the baud rate of specified port.
±
dd
:SYSTem:COMMunicate:SERial1:BITS . . .
:SYSTem:PRESet
R
Sets the data bits value of PORT 1.
Not affected
NON-VOLATILE