Filter
Top Products
Appendix D Performance Tests
Operational Verification
Operating and Programming Guide D-15
Operational Verification Conclusion
NOTE Perform the following step only if you wish to restore memory of the
58503B or 59551A Receiver to the factory default states. Doing this can
change several parameters that have been stored by a previous user. If
you have any questions or concerns, refer to Table 5-2 under the
description of the :SYSTEM:PRESET command on page 5-111 of
Chapter 5 in this guide for information on the type of information that
is stored.
On the terminal or computer, type:
:SYSTEM:PRESET and press the Return key.
This will ensure that your Receiver has been restored to the factory
defaults as originally received.
This completes the operational verification.