Filter
Top Products
Chapter 5 Command Reference
Programmable Pulse Output (59551A Only)
Operating and Programming Guide 5-85
59551A
This command controls whether the Programmable Pulse output will be just
one pulse or a sequence of pulses.
Expanded Syntax
:PULSe:CONTinuous:STATe ON or OFF
Parameter
OFF selects one pulse. ON selects a sequence of pulses.
Context Dependencies
With either state (OFF or ON) the output commences at the time and date
defined by :PULSe:STARt:DATE and :PULSe:STARt:TIME commands.
59551A
This query identifies whether the Programmable Pulse output is set to output
a single pulse or a sequence of pulses.
Response
• A value of 0 indicates the Receiver is set to output one pulse.
• A value of 1 indicates the Receiver is set to output a sequence of pulses.
:PULSe:CONTinuous:STATe . . .
:SYSTem:PRESet
Controls whether the Programmable Pulse output will be just one
pulse or a sequence of pulses.
OFF
NON-VOLATILE
:PULSe:CONTinuous:STATe?
RESPONSE FORMAT
Identifies whether the Programmable Pulse output is set to output
a single pulse or a sequence of pulses.
0 or 1