Filter
Top Products
Chapter 5 Command Reference
1 PPS Reference Synchronization
Operating and Programming Guide 5-35
Assessing 1 PPS Quality ________________________
(continued)
This query identifies if the Receiver has been in holdover longer than the
amount of time specified by the THReshold command. If it has, 1 will be
returned.
Response
A value of 1 indicates that the Receiver is in holdover, and has been operating
in holdover for a duration that exceeds the specified duration.
The value 0 indicates either the Receiver is not in holdover, or it has been in
holdover for less than the specified duration.
:SYNChronization:HOLDover:DURation:THReshold
:EXCeeded?
RESPONSE FORMAT
Identifies if the Receiver has been in holdover longer than the
amount of time specified by the THReshold command.
0 or 1