Open as PDF
FEATURES AND CONTROLS
Mode/Reverse Override Switch
Press the switch to toggle through the speedometer display modes
(except in reverse). See page 45.
To gain additional power while operating in reverse, press the override
switch before opening the throttle. This will cancel the reverse speed
The override switch also allows activation of All Wheel Drive in
reverse, if the AWD switch is on.
Activating the override switch with the throttle open and while operating in
reverse can cause loss of control. Do not activate the override switch while the
throttle is open.
Momentary High Beam Switch
Press this switch with your left forefinger to activate the headlight high
beam. The lights will return to low beam when the switch is released.
All Wheel Drive Switch
See page 44 for all wheel drive information.
See page 56 for winch information.
All Wheel Drive