Polaris 2010 99 Ranger Offroad Vehicle User Manual


 
59
MAINTENANCE
Periodic Maintenance Schedule
Careful periodic maintenance will help keep your vehicle in the safest, most reliable
condition. Inspection, adjustment and lubrication intervals of important compo-
nents are explained in the following chart:
Maintenance intervals are based upon average riding conditions and a vehicle
speed of approximately 10 miles per hour. Vehicles subjected to severe use, such
as operation in wet or dusty areas, should be inspected and serviced more fre-
quently. If you are not familiar with safe service and adjustment procedures, have
a qualified dealer perform these operations.
Inspect, clean, lubricate, adjust or replace parts as necessary.
J CAUTION: Due to the nature of these adjustments, it is recommended that
service be performed by an authorized Polaris dealer. Do not attempt to perform
this work unless you are familiar with mechanical repair.
" More often under severe use, such as dirty or wet conditions
L Emission Control System Service (California)
NOTE: Inspection may reveal the need for replacement parts. Always use genu-
ine Polaris parts available from your Polaris dealer.
Item Hours or
Odometer
Frequency Remarks
"L
Engine Oil - Level/Change
(4-Cycle)
100 hrs/1000
miles
6 months Check Level Daily; Break in Service at
1 month. Change oil more often in cold
weather use.
"L
Oil Filter 100 hrs/1000
miles
6 months Replace with oil change
"L
Engine breather filter 20 hrs Monthly Inspectreplace annually and as need-
ed
L
Engine breather hose 100 hrs 6 months Inspect
Engine Mounts 100 hrs 12 months Inspect
Engine Cylinder Head and
Cylinder Base Fasteners
25 hrs 3 months Inspect (re-torque required at first ser-
vice only)
"L
Air Filter - Main Element Weekly Weekly Inspect-Replace if necessary
JL
Valve Clearance 100 hrs 12 months Inspect/Adjust
L
Spark Plug 100 hrs 12 months Inspectreplace if necessary
JL
Ignition Timing 100 hrs 12 months Inspect and adjust as needed