Filter
Top Products
Page 86 8 — Customizing the 941X
8 — Customizing the 941X8 — Customizing the 941X
8 — Customizing the 941X Rev. D
The options represent the entire distance limit on your screen, from
complete left to complete right. Therefore, a cross-track distance setting
of 1,000 feet will display 500 feet to either side of your track line, while a
choice of ½ mile will display limits of ¼ mile to either side, and so forth.
To change the setting, press the
EDIT
menu key and use the up/down
cursor keys to scroll through the available choices. Press
ENTER
when
you are done, or
CLEAR
to leave the option unchanged. If necessary,
modify the
DISPLAY OPTION
setting to enable your choice of either
feet or meters in the cross-track display.
(NAVIGATION OPTIONS)
(NAVIGATION OPTIONS)(NAVIGATION OPTIONS)
(NAVIGATION OPTIONS)
The
STEER DIST PRECISION
function offers an extra level of accuracy
to the distance-to-waypoint display on the
STEERING
and
3-D STEER
screens. Situated in the upper-left portion of the screens, the distance-to-
waypoint is normally displayed in tenths of miles or kilometers.
By changing the
STEER DIST PRECISION
option from
NORMAL
to
HIGH
, the distance-to-waypoint display will increment in feet or meters,
once you have come within 1.0 mile or kilometer of the destination way-
point.
NOTE
The
CROSS-TRACK FULL SCALE
display formats apply only
to the
STEERING
screen, and not to the 3-D steer screen.
"
steer dist
precision