Filter
Top Products
Rev. D 5 — Waypoint and Route Navigation
5 — Waypoint and Route Navigation5 — Waypoint and Route Navigation
5 — Waypoint and Route Navigation Page 55
To navigate to a waypoint already stored in the 941X, first display it us-
ing one of the four waypoint list screens: press
WAYPTS/ROUTES
, then
the
WAYPT LIST
menu key. Use the up and down cursor arrow keys to
move the large arrow on the left of the screen so that it points to the
waypoint you want to navigate to. Then press the
GO TO
menu key, and
then
ENTER
.
The 941X will automatically switch to the
STEER
display to show infor-
mation for navigating to the waypoint. You can also press the
STEER
key
to display this information at any time. Two versions of the screen are
available to choose from.
WAYPOINT TIP
You can specify a waypoint to navigate to, and store it perma-
nently in the 941X’s database in one operation, if you like.
While in the
QUICK WAYPT
entry screen, just move the cur-
sor arrow up to the waypoint’s name and change it from
-QUIK-
to its permanent name before pressing
ENTER
. To
make a previously-entered QUICK waypoint become a perma-
nent waypoint, just go to a waypoint list screen and edit the
name (and description, if you wish).
Navigating to
Waypoints
WAYPOINT TIP
Since the waypoints you navigate to are usually nearby, the
LOCAL waypoint list is often the best list to use for finding the
waypoint in the database.