Filter
Top Products
Page 66 6 — The NAV LOG Function
6 — The NAV LOG Function6 — The NAV LOG Function
6 — The NAV LOG Function Rev. D
Under
NAV LOG
, the distance and bearing of each leg are displayed.
You can easily read the direction of the next leg of your trip from this
display.
Press the
NAV LOG
key to display the waypoints of your current trip. To
add a waypoint to the end of the trip, press
APPEND WAYPOINT
. A list
of the waypoints stored in memory is displayed. Use the up and down
cursor arrow keys to select the desired waypoint. (Press
NEXT LIST
, if
you wish, to display the waypoints list in a different order.) Press
ENTER
to add the waypoint to the NAV LOG. Repeat for any other waypoints
you want to add.
Adding
Waypoints to
the Trip