Filter
Top Products
Rev. D 5 — Waypoint and Route Navigation
5 — Waypoint and Route Navigation5 — Waypoint and Route Navigation
5 — Waypoint and Route Navigation Page 61
The distance and bearing of each leg are displayed near the center of the
screen.
To display the coordinates of each waypoint in place of the name and de-
scription, press the
NAME/COORD
menu key.
To plot an overhead view of the route, press the
QUICK PLOT
menu
key. When displaying the plot, you may use the
NEXT WAYPT
and
PREV WAYPT
menu keys to advance along the route or move back to-
wards the beginning.
Use
ZOOM IN
and
ZOOM OUT
to display a smaller or larger area.
When you have finished looking at the plot, press
RETURN
to go back to
the previous screen.
When navigating from one waypoint to another, you may find you have
wandered off the intended course line. Perhaps you may have avoided an
obstacle, or simply drifted slightly off-course. Whenever you are off-
course for any reason, you may choose either of two methods for getting
back on course.
After passing the obstacle, you may steer the boat back to the original
course line using the Cross-Track error display (Course 1 below), and
continue to the waypoint.
distance &
bearing
waypoint
coordinates
quick plot
Restarting the
Course Line