Filter
Top Products
Rev. D 8 — Customizing the 941X
8 — Customizing the 941X8 — Customizing the 941X
8 — Customizing the 941X Page 81
To change the maximum saved waypoint number:
1.
Move the cursor to this option and press the
EDIT
menu key. The
cursor will begin to flash in the first digit field.
2.
Using the numeric keypad, enter the value you want—up to a
maximum of 199—and press
ENTER
. For one- or two-digit values,
enter a zero as the leading digit(s).
The 941X will now automatically number your saved waypoints up to the
value you have set, at which point it will then begin to overwrite previ-
ously-saved waypoints with your new ones.
(DISPLAY OPTIONS)
(DISPLAY OPTIONS)(DISPLAY OPTIONS)
(DISPLAY OPTIONS)
To provide a substantial measure of theft protection for your Northstar
941X, you may enter a personalized owner identification message using
an access code mailed to you when you return your product registration
card to Northstar. This function asks you to enter this special four-digit
code before you can change the owner’s message.
You can enter your individual owner ID message once you have received
your registered owner access code card:
1.
Press the
STAR
key until you display the
USER
CUSTOMIZATION
screen.
2.
Go to
DISPLAY OPTIONS
and move the cursor arrow down to
OWNER’S MESSAGE:
.
3.
Press the
EDIT
menu key. A question window will appear, asking
you to enter your password.
4.
Enter the “access code” number from your Northstar ID card and
press
ENTER
. The first character block of the owner’s message will
flash.
5.
Enter the message (up to two lines) you want displayed each time
you power-up your 941X, and press
ENTER
.
Your message remains unchangeable from this point on, without first
entering your specific access code number and repeating the above pro-
cedure. The 941X will allow three attempts to enter the correct access
code; after that, all operations will “freeze,” requiring the user to shut
power off, then turn it back on again in order to resume functioning.
"
owner’s message
"