Filter
Top Products
Page 46 4 — Creating Waypoints and Routes
4 — Creating Waypoints and Routes4 — Creating Waypoints and Routes
4 — Creating Waypoints and Routes Rev. D
To add waypoints to the route, press the
INSERT
menu key. A list of
stored waypoints is displayed.
Scroll the waypoint list up or down using the cursor keys to designate the
desired waypoint, and press
ENTER
. The selected waypoint is now in the
route.
Repeat for each waypoint you wish to enter.
You can insert a waypoint in any part of a route. Waypoints are always
inserted into the route at the point indicated by the arrow at the left of
the screen. Move the arrow so that it is halfway between the two existing
waypoints of the route where you want the new waypoint to be located.
Follow the “inserting waypoints” procedure above for inserting this new
waypoint into the route.
You can also create a new waypoint as you enter it into the route. After
pressing
INSERT
from the
NEW ROUTE
waypoints screen, press
NEW
.from the
SELECT WAYPT
screen. Enter the name (with description, if
you wish) and coordinates of your new waypoint. Press
ENTER
. The new
waypoint is now part of the new route and stored among the waypoint
lists in the 941X’s memory.
inserting
waypoints
Press the NEXT LIST menu key, if you wish, to select different
waypoints from the alpha
alphaalpha
alpha, local
locallocal
local or saved
savedsaved
saved lists. (Avoidance
points cannot be used as waypoints in a route.)
creating new
waypoints
during route
entry