Filter
Top Products
Page 40 4 — Creating Waypoints and Routes
4 — Creating Waypoints and Routes4 — Creating Waypoints and Routes
4 — Creating Waypoints and Routes Rev. D
As a precaution, once you have designated a waypoint as an avoidance
area, the 941X does not allow you to navigate to it.
Once you have designated a waypoint as an avoidance area, the 941X will
alert you upon penetration of that area.
To set the audible avoidance area alert feature:
1.
Press the
STAR
key once to display the
ALARMS & BACKLIGHT
screen.
2.
Be sure that the cursor arrow is in front of the
ALARM AUDIO
option.
3.
Press the
EDIT ALARM
menu key.
4.
Use the up/down cursor keys to toggle the setting ON or OFF.
5.
Press
ENTER
to make your selection, or
CLEAR
to leave it un-
changed.
(NOTE: If you do not want to be notified of any other navigational
alarms, set the
ANCHOR DRAG
,
CROSS TRACK
,
ARRIVE RADIUS
,
and
DGPS
alarms to OFF. The audible alert will now only beep when you
enter an avoidance area.)
avoidance area
alarm
"
CAUTION:
The 941X’s avoidance alarm is intended only as an extra added
safety feature to help make you aware of possible hazards. It
does not replace local knowledge, proper use of charts, the per-
son on watch, or any other aspects of good seamanship that are
required for safe navigation.