Filter
Top Products
Rev. D 9 —
9 —9 —
9 — Installation and Interfacing
Installation and InterfacingInstallation and Interfacing
Installation and Interfacing Page 105
O-RING
ADAPTER
ANTENNA
3.00
.91
1.82
CAPTIVE SCREW
Figure 4—941X GPS-Only Antenna (AN145 & AN150)
7.00
2.5
3.5
TNC
Figure 5—941X Combo GPS/DGPS Antenna (AN190)
Tools needed: 1) flat-bladed screwdriver
2) knife blade
3) Amphenol crimp tools.
The RG-59 cable supplied with your 941X has one TNC connector at-
tached to the antenna-end of the coax. Connection to the antenna itself
involves the following steps:
mounting the
GPS-only
antenna