Filter
Top Products
1 To capture the first image in the panorama, press the
capture key.
2 Slowly turn the device left or right as shown by the
arrows.
A panorama preview is displayed and the camera
captures the image as you turn. The green arrow
indicates that you can slowly proceed to turn. The red
pause mark indicates that you should stop moving
until the green arrow is displayed again. You can
predict when the next key frame is captured when the
red rectangle moves to the centre of the preview area.
3 To complete the capture, select Stop. The panoramic
capture stops automatically when the maximum
image width has been reached. Note that it may take
some time for the device to process the captured
image.
After capturing an image
After you capture an image, select from the following
options in the active toolbar (available only if Show
captured image is enabled in the still image camera
settings):
• If you do not want to keep the image, select Delete
(
).
• To send the image using a multimedia message, e-
mail, or other connection methods, such as Bluetooth
connectivity, press the call key, or select Send (
).
If you are in a call, select Send to caller (
).
• To add the image to an album, select Add to album
.
• To view information about the image, select Details
.
• To send the image to a compatible online album,
select
(available only if you have set up an account
for an album).
• To zoom in an image after capturing it, select
to
open the image, and use the zoom keys of your device.
To use the image as wallpaper in the active standby mode,
select Options > Set as wallpaper.
To set the image as a call image for a contact, select
Options > Assign to contact.
To return to the viewfinder to capture a new image, press
the capture key.
Flash
The flash is available only in the main camera.
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
The camera of your device has a dual LED flash for low light
conditions.
Select the desired flash mode from the active toolbar:
Automatic (
), Red-eye ( ), On ( ), and Off ( ).
31
Camera