Filter
Top Products
Internet call alert — To be alerted for incoming internet
calls, select On. If you select Off, you are not alerted, but
you receive a notification if you missed a call.
Reject call with message — To send a text message to
a caller informing why you could not answer the call, select
Yes.
Message text — Write a text to be sent in a text message
when you reject a call.
Image in video call — If video is not sent during a video
call, you can select a still image to be displayed instead.
Automatic redial — Select On, and your device makes a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialling,
press the end key.
Show call duration — Activate this setting if you want
the length of a call to be displayed during the call.
Summary after call — Activate this setting if you want
the length of a call to be displayed after the call.
Speed dial — Select On, and the numbers assigned to the
number keys (2 to 9) can be dialled by pressing and
holding the key.
See " Speed dial a phone number
", p. 106.
Anykey answer — Select On, and you can answer an
incoming call by briefly pressing any keypad key, except
the power key, selection keys, zoom/volume key, or
capture key.
Line in use — This setting (network service) is shown only
if the SIM card supports two subscriber numbers, that is,
two phone lines. Select which phone line you want to use
for making calls and sending text messages. Calls on both
lines can be answered irrespective of the selected line. If
you select Line 2 and have not subscribed to this network
service, you are not able to make calls. When line 2 is
selected,
is shown in the standby mode.
Line change — To prevent line selection (network
service), select Disable if supported by your SIM card. To
change this setting, you need the PIN2 code.
Call divert
Select Menu > Tools > Settings and Phone > Call
divert.
Call divert allows you to divert incoming calls to your voice
mailbox or another phone number. For details, contact
your service provider.
To activate call divert, select Activate.
To check whether the option is active, select Check
status.
Several diverting options can be active at the same time.
When all calls are diverted,
is shown in the standby
mode.
Call barring
Select Menu > Tools > Settings and Phone > Call
barring.
Call barring (network service) allows you to restrict the
calls that you make or receive with the device. For
example, you can restrict all outgoing international calls
or incoming calls when you are abroad. To change the
settings, you need the barring password from your service
provider.
136
Settings