Nokia N86 Automobile Parts User Manual


 
4 Close the back cover. Ensure that the cover is properly
closed.
Remove the memory card
Important: Do not remove the memory card during an
operation when the card is being accessed. Doing so may
damage the memory card and the device, and corrupt data
stored on the card.
1 Before you remove the card, press the power key, and
select Remove memory card. All applications are
closed.
2When Removing memory card will close all open
applications. Remove anyway? is displayed, select
Yes.
3When Remove memory card and press 'OK' is
displayed, remove the back cover of the device.
4 Press the memory card to release it from the slot.
5 Pull out the memory card. If the device is switched on,
select OK.
6 Replace the back cover. Ensure that the cover is
properly closed.
Switch the device on and off
To switch on the device:
1 Press and hold the power key.
2 If the device asks for a PIN code or lock code, enter it,
and select OK. The preset lock code is 12345. If you
forget the code and your device is locked, your device
will require service and additional charges may apply.
For more information, contact a Nokia Care point or
your device dealer.
To switch off the device, press the power key briefly, and
select Switch off!.
Charge the battery
Your battery has been partially charged at the factory.
There may not be a need to charge the battery in advance.
If the device indicates a low charge, do the following:
13
Get started