Filter
Top Products
makes an active packet data connection to retrieve the
message both in and outside your home network.
Allow anonymous msgs. — Select whether you want to
reject messages from an anonymous sender.
Receive adverts — Select whether you want to receive
multimedia message advertisements.
Receive reports — Select whether you want the status
of the sent message to be shown in the log (network
service).
Deny report sending — Select whether you want to
prevent your device from sending delivery reports of
received messages.
Message validity — Select for how long the message
centre resends your message if the first attempt fails
(network service). If the message cannot be sent within
this time period, the message is deleted from the message
centre.
E-mail settings
Manage mailboxes
Select Menu > Messaging and Options > Settings > E-
mail.
To select which mailbox you want to use to send and
receive e-mail, select Mailbox in use and a mailbox.
To remove a mailbox and its messages from your device,
select Mailboxes, scroll to the desired mailbox, and select
Options > Delete.
To create a new mailbox, select Mailboxes > Options >
New mailbox. The name you give to the new mailbox
replaces Mailbox in the Messaging main view. You can have
up to six mailboxes.
Select Mailboxes and a mailbox to change the connection
settings, user settings, retrieval settings, and automatic
retrieval settings.
Mailbox settings
Select Menu > Messaging and Options > Settings > E-
mail > Mailboxes, a mailbox, and Mailbox settings.
To edit the settings for the mailbox, select from the
following:
My e-mail address — Enter your e-mail address.
User name — Enter your user name given to you by your
service provider.
Password — Enter your password. If you leave this field
blank, you are prompted for the password when you try
to connect to your remote mailbox.
Incoming mail server — Enter the IP address or host
name of the mail server that receives your e-mail.
Access point in use — Select an internet access point
(IAP).
Mailbox name — Enter a name for the mailbox.
Mailbox type — Defines the e-mail protocol that your
remote mailbox service provider recommends. The
options are POP3 and IMAP4. This setting cannot be
changed.
Security — Select the security option used to secure the
connection to the remote mailbox.
Port — Define a port for the connection.
101
Messaging