Filter
Top Products
TRANSFER BOX
OVERHAUL 51
Neutral warning lamp switch - if fitted - not
Range Rover Classic
1. Apply Hylosil PL32 sealant to threads of
switch.
2. Fit washer, fit and tighten switch.
Differential lock warning lamp switch - adjust
1. Move differential lock selector fork to
differential locked position.
2. Connect a 12V test lamp and battery to
differential lock switch.
3. Screw switch in until test lamp is illuminated
then screw switch in a further 1/2 turn; tighten
locknut.
4. Disengage differential lock, check that test
lamp is extinguished.
5. Remove test lamp.
6.
Up to serial no. 288709E:
Apply grease to a
new gasket and fit to differential lock side
cover.
7.
From serial no. 288709E:
Apply Hylosil RTV
102 sealant to mating face of differential lock
side cover.
8. Fit side cover, fit bolts and tighten to 25 Nm (18
lbf.ft).