Filter
Top Products
TRANSFER BOX
OVERHAUL 49
All transfer boxes
13. Apply Hylosil RTV 102 sealant or position new,
dry gasket to mating face of cover plate/power
take-off cover. Position plate/cover on bearing
housing ensuring that reference marks are
aligned.
14. Position clip to stud nut.
15. Apply Loctite 290 to threads of bolts and stud
nut.
16. Fit 5 bolts and stud nut and tighten by diagonal
selection to 25 Nm (18 lbf.ft).
NOTE: These bolts are threaded to head.
Bottom cover
1.
Up to serial no. 288709E:
Position new bottom
cover gasket, dry on main casing.
2.
From serial no. 288709E:
Apply Hylosil RTV
102 sealant to mating face of bottom cover.
3. Fit bottom cover.
4. Apply Loctite 290 to threads of bottom cover
securing bolts.
5. Fit bolts in positions shown and tighten by
diagonal selection to 25 Nm (18 lbf.ft).