Filter
Top Products
TRANSFER BOX
32
OVERHAUL
4. Lubricate a new mainshaft oil seal with
recommended oil.
5. Invert main casing and fit oil seal, lip side
facing inwards, using tool LRT-37-014.
Mainshaft input gear bearing housing
1. Ensure bearing track recess in housing is
clean.
2. Position a 3.15 mm (0.12 in) thick shim in
bearing housing.
NOTE: This is the the thinnest of the
shims available.
3. Using a suitable mandrel, fit new mainshaft
input gear bearing track.
CAUTION: Ensure bearing track is seated
squarely in recess.