TRANSFER BOX
44
OVERHAUL
10. Compress differential lock selector spring and
fit to selector fork.
11. Locate fingers of selector fork in groove in dog
clutch.
12. Fit differential lock selector shaft ensuring end
of shaft is located in recess in rear of housing.
13. Rotate selector shaft until the two flats for the
retaining clips are at right angles to the cover
plate mating face.
14. Compress selector spring and fit retaining clips
at each end of spring.
CAUTION: Ensure ends of spring are fully
seated in recess in clips.
15. Fit differential lock detent ball and spring.
16. Apply Loctite 290 to threads of detent plug.
17. Fit and tighten detent plug then unscrew 2 full
turns.