Filter
Top Products
TRANSFER BOX
16
OVERHAUL
4. Secure hand press LRT-99-002 in a vice.
5. Secure collars LRT-41-001 around rear
bearing.
NOTE: This bearing is adjacent to
threaded end of differential shaft.
6. Position differential in hand press with thrust
button, part of tool LRT-41-001 between press
mandrel and differential shaft.
7. Press differential out of bearing.
CAUTION: Take care that differential does
not drop out of bearing.
8. Remove differential from press, discard
bearing.
9. Remove high range gear and bush taking care
not to disturb high/low selector sleeve.
10. Make suitable alignment marks between
high/low selector sleeve and hub.
11. Remove high/low selector sleeve.