Filter
Top Products
TRANSFER BOX
OVERHAUL 17
12. Using a suitable puller and thrust button, part
of tool LRT-41-001, remove high/low hub and
low range gear.
13. Secure hand press LRT-99-002 in a vice.
14. Assemble collars LRT-41-002 around front
bearing.
NOTE: This bearing is adjacent to splined
end of differential shaft.
15. Position differential in hand press with thrust
button, part of tool LRT-41-001 between press
mandrel and differential shaft.
16. Press differential out of bearing.
CAUTION: Take care that differential does
not drop out of bearing.
17. Remove differential from press, discard
bearing.