Filter
Top Products
TRANSFER BOX
8
OVERHAUL
8. Compress differential lock selector fork spring
and remove retaining clip from each end of
spring.
9. Withdraw differential lock selector shaft from
front output housing, recover spring.
10. Remove differential lock selector fork.
11. Position propeller shaft flange holding tool
LRT-51-003 to output shaft flange.
12. Remove and discard self-locking nut.
13. Remove steel and felt washers, discard felt
washer.
14. Remove output shaft flange together with mud
shield.
NOTE: A replacement output flange will be
supplied together with new mud shield
and output shaft oil seal.